There is no debating the numerous benefits of studio workout sessions. However, a lot of people find them less enjoyable and more challenging to follow because they do not replicate the energy of traditional gyms or one-on-one sessions. Otari is a workout mat that hopes to bridge this gap. Asides bringing your instructor closer to you than ever before, this home fitness studio can monitor your movements and let you know how well you’re exercising.

One’s quality of sleep is directly related to productivity, health, and well-being. According to The Sleep Council, 40% of people report feeling more positive, 33% report feeling happier, and 25% are more productive when they get a good night’s sleep. Curiously, about 20% of adults all over the world report not getting enough sleep.

We all have seen that a flame from candlelight always points upwards. It will point upwards even if we tilt the candle. Ever wondered why it is happening? Let us discuss the reason for this in this article.

Front-facing fog lights and fog lamps are a type of automotive headlight that is designed to emit light in a bar-shaped beam. The beam is typically designed to have a sharp cutoff on top, and the actual lights are usually installed low and aimed toward the ground at a sharp angle.

Royal Enfield despite of having 350 CC Engine is able to reach a top speed of 90-100 kmph whereas KTM Duke 390 is having 373 CC Engine is able to attain 160 to 165 kmph. Which simply means power of Duke 390 is way ahead of RE 350.

Now,coming to torque figures of both machine.Duke 390 produces 35 N⋅m @ 7250 rpm whereas RE 350 produces 28 Nm at 4000 rpm, which simply means maximum torque of RE 350 comes at very early stage whereas Duke 390 takes time to attain its maximum torque.In short we can say that RE 350 is a better pulling machine.

Going from 0 to 60 mainly involves the throttle, engine, transmission or differential, and tires of a vehicle. How fast it takes depends on the features of these parts.When you hit the gas pedal/throttle on your vehicle, there are a number of forces at play to get it going. 

Fillet is a round corner whereas chamfer is a slant face created at the corner. 
 

Even though both perform same function selection of chamfer or fillet depends on how the component is manufactured.We will discuss why and when they are used while creating parts in this article.
 

Hazard lights are those lights which are indicative of a potential hazard that the vehicle flashing it may pose. When the lights are switched on, the four indicators (front and rear - right and left) begin to blink at the same time. This is an indication to all the vehicles passing it that there may be some problem with it. They are also called warning flashers, warning lights, flashers or 4-way flashers. These lights have to be independent of any other lighting or indication system provided in the car. 

1) Important Air Conditioner Terms

SEER: Seasonal Energy Efficiency Ratio. Just remember this, higher the SEER, more will be the efficiency of unit, resulting in a lower operating cost.

Blower (Blower Motor): The motor and fan assembly mounted near the evaporator that draws air over the evaporator. In automotive applications, the blower motor may draw outside or inside air, depending on control settings.

Charging: Adding refrigerant to a system.

Adaptive Headlight System :-

Suppose you are driving home from a weekend vacation. It's late at night, and the winding two-lane road has no streetlights. You approach a curve at 40 mph -- slow enough to make the turn, but too fast to stop suddenly if you need to. 
In this case what would you do ?